Select a Country or Region

BVE200 Data Acquisition Module
BVE200 IoT Cellular Module
BVE200 Cat 1 LTE Module
BVE200 Data Acquisition Module
BVE200 IoT Cellular Module
BVE200 Cat 1 LTE Module

BVE200 Cat 1 LTE IoT Cellular Module

  • Plug-in IoT Cellular Module
  • Routing Cat 1 LTE Module
  • Maximum 10Mbps(DL) 5Mbps(UL)
  • 1* SIM / 1* eSIM / SIM + eSIM Three Optional Modes
  • Size 38mm (L) × 38mm (W)
  • Assembly Hole 34mm (L) × 34mm (W)

Get Free Quote

Share to

BVE200 Cat 1 LTE IoT Cellular Module



  • LTE Cat.1 IoT Cellular Module
  • Plug-and-Play
  • USIM, eSIM Dual-card Dual-standby
  • Abundant Peripheral Interfaces
  • Medium-to-High Speed Data Transmission
  • 10/100M Network Port Self-adaptation


  • BVE200 IoT cellular module is a plug-and-play cat.1 IoT routing component free of SMT and code development offering stable portable wireless connectivity applicable for the rapid realization of IoT application terminals.


  • This IoT cellular module also creatively supports Ethernet port data connection and configures main peripheral interfaces such as USB \ UART with strong extension capability to match the requirements in diverse application scenarios. Also, the BVE200 IoT cellular module provides much flexibility and ease of integration for downstream IoT solution providers' application development.


  • Distinctively, BVE200 IoT cellular module supports three optional modes of single SIM / single eSIM / SIM and eSIM dual card dual standby, managing multi-channel and multi-operator backup. So this IoT cellular module can flexibly select operator services corresponding to the spectrum coverage of locations.


  • Due to the combination of performance, security, and flexibility, this BVE200 IoT cellular module is suitable for efficient deployment in more wireless industrial IoT application scenarios demanding low latency and low throughput data communication, for instance, security monitoring, data transmission, industrial DTU, unattended, electricity meters, shared equipment, and smart tracking cards.


Ask A Question


Frequency Bands

China & Southeast Asia Europe & Africa Asia Pacific Middle East America

LTE: B1/3/5/8/38/40/41







We welcome worldwide wireless communication/telecom operators or IoT project contractors to inquire more on BVE200 IoT cellular module about global frequency band customization, customized UI / Application / Function / Appearance service, etc.



New Energy

  • Charging Pile
  • Smart Grids
  • Solar Monitor

Smart Traffic

  • POC Walkie Talkie
  • POS Mobile Payment
  • Remote Tracker

IoT Terminal

  • Monitor Terminal
  • Collector Terminal




IoT Business Connection

BVE200 IoT Cellular Module to Shared Devices / Unattended

Based on the high-quality coverage network of 4G LTE Cat.1, moderate bandwidth transmission rate, advantage on power consumption and unit cost, and fast connection to the main sensor control board, this plug-and-play BVE200 IoT cellular module can quickly satisfy the Internet data transmission requirements of IoT device in the field of shared economy and unattended scenarios.



BVE200 IoT Cellular Module to Industrial Vision OCR Scene

Combined industrial vision OCR with wireless IPC or built-in sensor detection devices, together with background AI learning, this BVE200 IoT cellular module can fulfill the applications during industrial manufacturing such as nameplate reading, workpiece surface appearance detection, assembly validity detection of sealing ring, size measurement, robotic arm control.

BVE200 IoT cellular module helps the rapid transformation of the Industrial Internet of Things at low cost and power consumption.

Industrial Vision OCR



Wireless Industrial Router

BVE200 IoT Cellular Module to Wireless Industrial Router / DTU / RTU

To develop the IoT devices, you may just supplement a power supply and interface expansion board to test and finish the customized IoT device quickly, such as a wireless industrial router, DTU, RTU, etc.



BVE200 IoT Cellular Module to MBB Terminal

BVE200 IoT cellular module matches the industry-standard peripheral interface and power board, to facilitate the evolvement of diversified mobile broadband devices like 4G CPE, battery MiFi, and WiFi hotspot UFi with a low threshold.

Portable MBB Terminal


BVE200 Cat 1 LTE IoT Cellular Module

Basic Parameters


38mm(D) × 38mm(W)

Working temperature

-30℃ to +70℃

Power supply

4.5V-16V, Type@12V

Storage temperature

-40℃ to +85℃


4G antenna

2 I-PEX (Optional)


GPIO*2 for wake-up/sleep

USB 2.0

USB2.0 *1


4PIN socket


3PIN *1, 3.3V TTL


Reset button


Nano (U)SIM *1


Power/Net *1


eSIM IC optional Customization



Network Configuration

4G Wireless standard


4G Wireless Data Rate

FDD-LTE: Max 10Mbps(DL), 5Mbps(UL)
TDD-LTE: Max 8.96Mbps(DL), 3.1Mbps(UL)

4G Wireless performance

Transmitting Power and Receiver Sensitivity Conform to Standard of 3GPP R13


LAN/WAN configurable 10/100Mbps self-adaptive

BVE200 IoT 4G Module Diagram

Q: What Is LTE Cat 1

A: LTE Cat 1 is a 4G LTE communication standard with a maximum 10 Mbit/s downlink rate and 5 Mbit/s uplink rate. It is aimed at serving rich machine-to-machine (M2M) and Internet of Things (IoT) applications that require medium speed transfer speeds and low latency, standardized in 2008.


Q: LTE Cat 1 VS LTE Cat 4

A: The largest difference is the data transfer rate.

Cat 1 supports download speeds up to 10 Mbps, while Cat 4 supports up to 50 Mbps.

Click this blog to check more information.


Q: LTE Cat 1 Bands

A: At present, ThinkWill designs LTE Cat 1 modules with China and Southeast Asia Bands:

LTE: B1/3/5/8/38/40/41


For Europe, Africa, the Middle East, America, and other regions, ThinkWill welcomes worldwide wireless communication operators or IoT project contractors to inquire about the customization. Click to check our Core Advantages.


The product pictures and screen content on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display content (including but not limited to background, UI, and graphics) may be slightly different, please subject to the actual product.

The data on the above page are theoretical values, all from ThinkWill's internal laboratory, obtained under a specific test environment (please see each specific description), actual use may be due to individual product differences, software versions, use conditions and environmental factors The difference is slightly different, please refer to the actual use.

Due to the real-time changes in product batches and production supply factors, in order to provide as accurate product information, specification parameters, and product features as possible, ThinkWill may adjust and revise the text descriptions, picture effects and other content on the above pages in real time to match the actual products. Performance, specifications, indexes, parts and other information are matched.

In the event that the above-mentioned modifications and adjustments are indeed necessary, no special notice will be given.

Recommended products


Shenzhen ThinkWill Communication Technology Co., Ltd.

+86 755-21601999
+86 177 2249 5914
13th Floor, Yishang 3D Industrial Park, No.642-2 Zhoushi Road, Hangcheng Street, Baoan District, Shenzhen, China


Start a new project? Get in touch with us